UK was close behind, exporting 675,000 tonnes, with much of the waste sent to Turkey, Malaysia and Indonesia Germany was the world’s largest exporter of plastic waste in 2025 and sent more than 810,000 tonnes abroad, according to analysis of trade data carried out for the Guardian.The UK followed close behind, according to the analysis by Watershed Investigations and the Basel Action Network. It exported more than 675,000 tonnes, its highest level in eight years and enough to fill about 127,000
UK was close behind, exporting 675,000 tonnes, with much of the waste sent to Turkey, Malaysia and Indonesia
Germany was the world’s largest exporter of plastic waste in 2025 and sent more than 810,000 tonnes abroad, according to analysis of trade data carried out for the Guardian.
The UK followed close behind, according to the analysis by Watershed Investigations and the Basel Action Network. It exported more than 675,000 tonnes, its highest level in eight years and enough to fill about 127,000 shipping containers.
Forty thousand miles of plastic waste wash through the global ocean every year, enough to wrap the Earth at the equator. But walk into the right store, and you can personally shorten that pipeline by a few feet, returning a pair of worn sneakers, a dead laptop, or a piece of furniture destined for the dumpster.
Some retailers have built genuine end-of-life infrastructure for the products they sell — not just a PR line, but real systems with documented results. The seven below have the numbers to
Forty thousand miles of plastic waste wash through the global ocean every year, enough to wrap the Earth at the equator. But walk into the right store, and you can personally shorten that pipeline by a few feet, returning a pair of worn sneakers, a dead laptop, or a piece of furniture destined for the dumpster.
Some retailers have built genuine end-of-life infrastructure for the products they sell — not just a PR line, but real systems with documented results. The seven below have the numbers to back it up, updated for 2026.
Patagonia
Patagonia’s Worn Wear program remains one of the most comprehensive take-back systems in retail apparel. In 2025, customers made more than 137,000 trade-ins — almost 71,000 of them from return and warranty claims — and the online Shop Used feature launched in September 2024 has expanded the secondhand market significantly. Items deemed wearable are cleaned, repaired, and resold through Worn Wear; those beyond repair enter a recycling pipeline.
On the material innovation side, Patagonia partnered with Eastman in 2024 to process 8,000 pounds of pre- and post-consumer clothing waste through molecular recycling — breaking apparel down to chemical building blocks for reuse as new fiber. The brand has also moved aggressively on materials: by fall 2025, over 90 percent of Patagonia’s fabrics were recycled, organic, or traceable. Its 2025 Work in Progress Report disclosed that reducing hang tags by over 40 million pieces has avoided 170,000 pounds of packaging waste. The structural challenge — mechanically recycling blended fabrics — remains unsolved at industrial scale, and Patagonia acknowledges it openly.
Apple
Apple’s trade-in and recycling program sent 15.9 million devices to new owners through refurbishment schemes in 2024 alone. Devices that cannot be refurbished are processed by Daisy, Apple’s disassembly robot, which can now break down 36 models of iPhone into discrete components to recover aluminum, copper, rare earth elements, and other materials. A second robot, Dave, disassembles Taptic Engines to recover rare earth magnets, tungsten, and steel.
The material-recovery numbers are striking. In 2024, 24 percent of all materials shipped in Apple products came from recycled or renewable sources, up from 10 percent in 2019. Recycled aluminum accounted for 71 percent of the aluminum Apple purchased. The company avoided 6.2 million metric tons of greenhouse gas emissions by using recycled and low-carbon materials in 2024, according to its 2025 Environmental Progress Report. Apple has also surpassed 99 percent on its 2025 goal to use 100 percent recycled rare earth elements in all magnets and 100 percent recycled cobalt in all Apple-designed batteries. Customers can drop devices off at any Apple Store or ship for free.
Best Buy
Best Buy has collected 2.7 billion pounds of electronics and appliances since launching its recycling program in 2009, making it the nation’s largest retail collector of e-waste. The program accepts most consumer electronics at more than 1,000 stores regardless of where items were purchased, collecting more than 400 pounds of product every minute stores are open.
The program has expanded: a mail-in recycling service now lets customers without easy store access ship old tech in purpose-built boxes. A home haul-away service launched for customers who cannot transport large items. Best Buy requires all recycling partners to comply with rigorous environmental management standards and holds them to regulatory compliance and responsible workforce practices. TVs and monitors carry a $25 fee; most other electronics — phones, laptops, tablets, cables — are accepted free.
Nike
Nike’s original Reuse-a-Shoe program launched in 1995 to recycle worn athletic footwear into Nike Grind material for surfaces and new products has evolved into the Recycling + Donation (RAD) service, now available globally.
The program accepts athletic footwear and apparel from any brand and inspects each item to determine donation or recycling eligibility. Wearable items go to nonprofit partners including Soles4Souls for redistribution to communities in need; worn-out footwear is ground down into Nike Grind, which goes into playground surfaces, running tracks, and new Nike products.
Part of Nike’s Move to Zero initiative, targeting zero carbon and zero waste across the supply chain, the Participating stores accept shoes of any brand — athletic footwear only; no cleats, boots, or sandals. Nike also runs Nike Refurbished, which cleans and resells gently worn or slightly imperfect footwear and apparel at select factory and community stores, extending product life before material recovery.
Staples
Staples pioneered national retail recycling in 2007 as the first U.S. retailer to offer a universal e-waste takeback program. Today the program accepts over 50 types of materials including computers, printers, phones, cables, batteries, crayons, and coffee machines from any brand. Since 2021, Staples has recycled 7,000 tons of e-waste and 19 million ink and toner cartridges, helping HP reach a milestone of 1 billion cartridges recycled.
Staples’ Easy Rewards program currently gives members 500 points (equivalent to $5 back) per month for tech recycling. Ink and toner cartridge recycling earns $2 per cartridge for members spending at least $30 on ink over the previous 180 days, up to a monthly limit. Staples uses certified recyclers whenever possible, and recycled toner material gets routed into road construction aggregate. The company accepts electronics in-store at customer service desks at all U.S. Staples locations.
IKEA
Furniture is the United States’ largest category of discarded household goods, with Americans throwing away approximately 12 million tons of it each year. IKEA’s Buyback & Resell program addresses the problem at the point of sale: customers fill out an online form, receive a value estimate, and bring gently used IKEA furniture to any participating store in exchange for store credit. Items that pass inspection enter the As-Is section for resale; those that cannot be resold are recycled under IKEA’s zero-waste-to-landfill policy.
The U.S. program now runs in 33 stores and, as of 2025, accepts more than 5,000 product types, including tables, chairs, storage units, lamps, and kids’ furniture among many. Globally, IKEA’s circular initiatives contributed to a 24.3 percent reduction in the company’s climate footprint while revenue grew 30.9 percent. Sofas, mattresses, and modified products are not accepted. IKEA Family members currently receive 50 percent more in store credit through May 2026.
REI
REI’s Re/Supply program sold nearly 1.4 million items of used outdoor gear in 2024, double the volume from 2019. The program accepts trade-ins of gently used REI-brand and name-brand gear including backpacks, sleeping bags, tents, and apparel. Members receive store credit; items are inspected, cleaned, and resold at a discount. Selling a used item through Re/Supply emits at least 50 percent less carbon than selling a new equivalent, even accounting for shipping, cleaning, and remerchandising.
REI also became the first major U.S. retailer to reach 90 percent operational waste diversion, achieving zero-waste certification in 2024 that audited and independently verified — ahead of Walmart and Target. Three of its distribution centers hold TRUE Zero Waste certification. In 2024, about 52 percent of the polyester and 45 percent of the nylon in REI Co-op products came from recycled sources. REI also charges brand partners a recycling fee to discourage individual plastic poly bags, and the majority of brands it carries have eliminated them as standard practice.
Read a transcript of this episode. Subscribe to receive transcripts.
What we call waste is really just misallocated feedstock—raw materials waiting to be cycled back into the next generation of products and packaging. According to research by the World Economic Forum and United Nations Development Programme, the circular economy could unlock $4.5 trillion in new global value by 2030, and investors are racing to capture part of that opportunity. Meet Elizabeth Blankenship-Singh, Director of Inn
What we call waste is really just misallocated feedstock—raw materials waiting to be cycled back into the next generation of products and packaging. According to research by the World Economic Forum and United Nations Development Programme, the circular economy could unlock $4.5 trillion in new global value by 2030, and investors are racing to capture part of that opportunity. Meet Elizabeth Blankenship-Singh, Director of Innovation at Overlay Capital, an Atlanta-based alternative investment firm whose Waste and Materials Fund is backing both early-stage materials innovators and later-stage recycling operations with established infrastructure. Overlay’s strategy involves investing in innovation and implementation simultaneously—in both startups and established companies—to accelerate progress across multiple layers of the circular economy. It offers a window into where smart money sees the materials transition heading.
Elizabeth Blankenship-Singh, Director of Innovation at Overlay Capital, is our guest on Sustainability In Your Ear.
Elizabeth explains that sortation is the biggest bottleneck at the materials recycling facilities (MRFs) your garbage and recycling are sent to after curbside collection. The U.S. is simultaneously the world’s leading exporter of scrap aluminum and the number one importer of finished aluminum, because we’ve lacked domestic sorting capacity. Overlay has invested in companies like AMP Robotics, which recently closed a 20-year contract with SPSA, a southeastern Virginia municipal authority, to sort all recyclables from four to five cities using AI-driven systems. When you fix sortation, she says, you trigger a domino effect: recycling rates climb, landfill life extends, and margins improve as higher-purity materials command premium prices.
Overlay’s portfolio also includes next-generation materials companies united by a common thesis: they must be better, faster, cheaper, and more sustainable than what they replace. Cruz Foam converts chitin from shrimp shells into compostable packaging foam. Simplifyber uses cellulose to create biodegradable soft goods through 3D molding, bypassing traditional textile manufacturing entirely. Terra CO2 just closed a $124 million Series B to scale low-carbon cement technology that could cut into concrete’s 8% share of annual global CO2 emissions. Each uses abundant, waste-derived feedstocks and has achieved or is on a clear path to price parity with incumbents.
In a converted 18th-century chapel on the grounds of Yorkshire Sculpture Park, a strange form creeps through openings in the architecture. One can imagine its clipper- and knife-footed tendrils scurrying across the floor as it spills from an upper aperture and even slithers around part of the building’s exterior. Its otherworldly genesis is at the hands of Nicola Turner, known for her monumental, contorted textile installations that often surge from structures and public spaces.
Turner’s s
In a converted 18th-century chapel on the grounds of Yorkshire Sculpture Park, a strange form creeps through openings in the architecture. One can imagine its clipper- and knife-footed tendrils scurrying across the floor as it spills from an upper aperture and even slithers around part of the building’s exterior. Its otherworldly genesis is at the hands of Nicola Turner, known for her monumental, contorted textile installations that often surge from structures and public spaces.
Turner’s solo exhibition, Time’s Scythe, comprises forms made of recycled wool and horsehair, which she hand-stitches inside of mesh to create the bulging, knotted forms. “This is Turner’s first large-scale installation to use pale wool and creates a different energy to her dark sculptures, moving away from their more melancholic character,” the gallery says.
Time’s Scythe continues through September 27 in Wakefield. If you go, check out LR Vandy’s provocative exhibition, Rise, which also continues into September. See more on Turner’s Instagram, and for more twisting, creature-like forms, might also enjoy the work of Kate MccGwire.
Recycling in Ontario is changing in a big way. As of January 1, 2026, the province has fully transitioned to a new Blue Box system that changes who is responsible for recycling and is intended to make the process more consistent across Ontario.
Under the new rules, recycling is now managed and funded by the companies that produce packaging and paper products, rather than municipalities. This shift is known as Extended Producer Responsibility (EPR). The idea is that companies should take more r
Recycling in Ontario is changing in a big way. As of January 1, 2026, the province has fully transitioned to a new Blue Box system that changes who is responsible for recycling and is intended to make the process more consistent across Ontario.
Under the new rules, recycling is now managed and funded by the companies that produce packaging and paper products, rather than municipalities. This shift is known as Extended Producer Responsibility (EPR). The idea is that companies should take more responsibility for the waste they create, while making recycling systems easier for residents to navigate.
The goal is to recycle more, send less waste to landfills, and move toward a more circular economy. But for many Ontarians, the new rules also raise a lot of questions. Here are some of the most common ones.
Frequently Asked Questions
1. What changed in Ontario’s recycling system in 2026?
Ontario’s Blue Box program is now fully run by producers – the companies that create packaging and paper products. That means they are responsible for collecting, sorting, and recycling those materials.
An organization called Circular Materials now helps operate the Blue Box program across Ontario.
For most residents, the day-to-day experience may still look similar. The province will continue using the same blue boxes, the same curbside pickup and will continue to accept many of the same items. But behind the scenes the system has changed significantly, with the goal of creating more consistent recycling rules across the province.
2. Why is Ontario changing its recycling system?
Before this transition, municipalities shared the cost and responsibility of recycling programs, and each city or region often had its own rules. That meant something recyclable in one community might not be accepted in another.
The new system is meant to reduce that confusion. By making producers responsible for the materials they put into the marketplace, Ontario is also putting more pressure on companies to reduce unnecessary packaging and design products that are easier to recycle.
3. Will recycling rules still differ depending on where I live?
Historically, yes. What you could recycle in Toronto might not have been accepted in London, Kingston, or another municipality.
The new Blue Box system is designed to make accepted materials more consistent across Ontario. However, some local differences may still exist in how recycling is collected. For example, some municipalities may use blue boxes, while others use large recycling carts. Pickup schedules and collection contractors may also vary by region.
So while the rules about what can be recycled are becoming more standardized, the way recycling is collected may still look different from place to place.
4. Can I recycle…?
If you’ve ever stood over your recycling bin wondering, “can I recycle this?” You’re not alone.
Some cities across Ontario have helpful tools. For example, if you live in Toronto, one of the easiest ways to check is by using the Waste Wizard, an online tool that lets you search specific items and find out whether they belong in recycling, garbage, organics, or special drop-off.
Although Toronto’s Waste Wizard is one of the best-known examples, other municipalities across Ontario offer similar search tools or waste apps. They can be especially helpful for sorting items like black plastic, coffee pods, takeout containers, or mixed-material packaging.
The updated Blue Box program expands the list of accepted materials. In many cases, you can now recycle more types of packaging than before, including items like foam containers, black plastic, and certain flexible plastics. But contamination — such as food waste, liquids, or hazardous materials — can still create major problems in the recycling stream.
5. If the province has one system, why do municipalities still matter?
Even though the recycling rules are now set at the provincial level, municipalities still play a major role in waste management.
They are often responsible for services like garbage collection, green bins or organics, household hazardous waste depots and local public education. Municipalities also help residents understand changes to collection schedules, bin types and local disposal options.
In other words, the province may be standardizing the recycling system, but municipalities are still an important part of how that system works in practice.
This is one of the most important questions and one of the hardest to answer simply.
Recycling can help reduce landfill waste and recover useful materials, but it is far from a perfect solution. In Canada, recycling rates remain low. Currently, only 7% of Ontario’s waste is recycled through the Blue Box. This is due to a combination of factors, including contamination, complex materials, and limited recycling markets.
Ontario’s new recycling system is intended to improve outcomes by making producers more accountable and expanding what can be collected. But recycling alone will not solve the waste crisis.
Reducing waste in the first place and reusing materials whenever possible remains essential.
7. What should I do with electronics or hazardous waste?
Electronics and hazardous materials should never go in your Blue Box.
Items like batteries, old phones, chargers, paint, propane tanks, light bulbs, and cleaning chemicals require special handling. If they are placed in recycling, they can contaminate other materials, damage equipment, or create safety risks for workers.
Instead, these items should be taken to a designated drop-off depot, household hazardous waste site, or e-waste collection program in your municipality. Many communities in Ontario offer permanent depots or seasonal collection events for these materials.
If you are unsure, your municipality’s waste lookup tool is the best place to check.
The Bottom Line
Ontario’s new recycling rules are a major shift toward a more consistent and accountable system. By making producers responsible for the packaging they create the province is trying to improve recycling and reduce confusion for residents.
But even the best recycling system depends on public understanding and participation. Knowing what belongs in your Blue Box and taking the extra moment to check when you’re unsure can make a real difference.
At the same time, recycling is only one part of the solution. If Ontario is serious about reducing waste and protecting the environment, we also need to focus on addressing the systemic root of continuous waste generation in the first place.
Corrugated cardboard makes its way from warehouse to mill in about two weeks. In contrast, plastic packaging can take centuries to break down, and even the most optimistic estimates say only 5 to 6 percent of U.S. plastic is actually recycled. This difference highlights both the promise and the challenges of creating a circular packaging economy.
Back in April 2020, when this article first appeared, the recycling industry was still struggling after China banned imported recyclables in 2018. Arou
Corrugated cardboard makes its way from warehouse to mill in about two weeks. In contrast, plastic packaging can take centuries to break down, and even the most optimistic estimates say only 5 to 6 percent of U.S. plastic is actually recycled. This difference highlights both the promise and the challenges of creating a circular packaging economy.
Back in April 2020, when this article first appeared, the recycling industry was still struggling after China banned imported recyclables in 2018. Around that time, DS Smith opened its first North American recycling plant in Reading, Pennsylvania, marking the first closed-loop corrugated packaging system. Five years later, the circular packaging sector has become a $245 billion global market and is expected to nearly double by 2034.
However, growth does not always mean true circularity. The gap between what companies promise and what recycling systems actually deliver is under more scrutiny than ever.
How the Recycling Loop Works and Where It Breaks
Many people picture recycling as a simple process: items go from the curbside bin to a materials recovery facility (MRF) and then become new products. In reality, the process is more complicated. Mixed curbside collections have about a 25 percent contamination rate in baled recyclables from MRFs, so more sorting is needed before they can be turned into new materials. In the past, this extra sorting was often done cheaply in other countries.
After China stopped buying U.S. recyclables in 2018, the U.S. was left with about a third of its collected materials and no place to send them. This led to a crisis: many communities lost their recycling programs, and it became obvious that the U.S. needed more domestic processing and cleaner materials from better recycling programs.
Paper and corrugated cardboard are still the big success stories in circular packaging. In 2024, the U.S. recycled over 33 million tons of cardboard, or about 90,000 tons each day, reaching a recovery rate between 69 and 74 percent, according to the American Forest & Paper Association. The share of recycled paper used at U.S. mills has grown from 36.6 percent in 2005 to 44.4 percent in 2024.
Plastic is still a major challenge. Only about 5 to 6 percent of U.S. plastic packaging is recovered and made into new packaging or products.
A Growing Market With Caveats
Europe is leading the way in recycling growth, thanks to strict regulations. North America is catching up through corporate ESG commitments, extended producer responsibility programs, and state-level policies.
Paper-based packaging leads in circular packaging revenue, making up about 40 percent of the global market in 2024. This is due to advances in fiber recovery technology and the fact that consumers are used to recycling cardboard. Reusable and refillable packaging is growing quickly, but it is still a small part of the market. As a result, the food and beverage sector makes up nearly 47 percent of circular packaging demand, and packaging companies are teaming up with recyclers to meet this need.
Industry consolidation signals how seriously investors have bet on this sector. In July 2024, Smurfit Kappa completed its acquisition of WestRock to form Smurfit WestRock, one of the world’s largest paper-based packaging companies, with $32 billion in combined revenue and 100,000 employees across 40 countries. Separately, International Paper announced an agreement to acquire DS Smith in a deal valuing DS Smith at approximately $9.9 billion. These deals suggest that fiber-based, recyclable packaging is a durable growth market.
The DS Smith Model, Five Years Later
In March 2020, DS Smith opened its first North American recycling plant in Reading, Pennsylvania, right next to an existing paper mill and corrugated packaging facility. These three sites could make, use, collect, and recycle corrugated boxes in about two weeks, creating a true closed loop. DS Smith got clean materials from distribution centers, packaging facilities, and retailers instead of mixed curbside collections, which helped keep contamination low.
Since then, this model has grown significantly. DS Smith, now part of International Paper, and other companies have shown that fiber-based packaging circular systems can work on a large scale. The Ellen MacArthur Foundation’s 2024 Global Commitment Progress Report, which covers over 1,000 organizations representing 20 percent of global plastic packaging production, noted that companies like Amcor have “doubled the share of recycled content in their plastic packaging, making as much progress in four years as in the four decades before,” according to EMF leader Rob Opsomer.
Where Optimism Meets Reality
But the numbers are more complex than market growth projections suggest. The Ellen MacArthur Foundation (EMF) found that the 2025 targets set by its member companies in 2018—to cut virgin plastic use by 18 percent, reach 26 percent recycled content, and achieve 100 percent reusable, recyclable, or compostable packaging—are now mostly out of reach without major changes. Together, these companies have avoided using 9.6 million tons of virgin plastic since 2018, but that is less than 3 percent of annual plastic production. At the same time, the overall market increased plastic packaging use by 8 percent.
Scaling up reusable packaging has been especially hard. Even though 64 percent of EMF Commitment participants have started pilot programs, reuse models make up only 1.3 percent of packaging, according to the Foundation’s 2024 analysis. The main obstacles are structural: the U.S. lacks a shared reverse logistics system, does not offer enough consumer incentives, and has no binding policies to make reuse practical.
Greenwashing has made the credibility problem worse. In October 2024, the legal advocacy group ClientEarth released a report saying that vague plastic recycling claims, like “100-percent recyclable” and circular loop images, mislead consumers about the real environmental impact of products and violate UK and EU consumer protection laws.
“The thing that blew my mind,” said Myles Cohen, founder of consulting firm Circular Ventures, at the September 2024 Packaging Recycling Summit, “is that in the company’s defense, they argued, ‘Hey, our statements were just classic puffery.’” Cohen called greenwashing “a pet peeve that damages not just individual companies but the packaging and recycling industries as a whole.”
Not all circular packaging strategies are equally effective. The evidence shows a clear ranking of materials:
Fiber-based packaging, like corrugated cardboard and paperboard, has proven circularity supported by real infrastructure. The DS Smith model is successful because it uses clean materials and relies on commercial, not residential, collection systems.
Aluminum is the most valuable recyclable material. Recycling just one can saves as much energy as half a gallon of gas. Beverage cans contain 73 percent recycled content, and steel cans are recycled at an 80 percent rate, so metal packaging truly supports a circular system.
Reusable packaging is most effective in closed-loop commercial settings, such as logistics, food service, and institutional supply chains. It does not work as well in consumer retail or quick-service restaurants, where returning packaging is expensive and unreliable.
Compostable packaging is only a limited solution. More industry analysts are skeptical because most communities do not have home composting, industrial composting facilities often reject packaging, and composting creates greenhouse gases instead of recovering materials.
Plastic recycling needs a very specific approach. PET bottles and HDPE containers are recycled more successfully than most other plastics. Flexible plastics like films, pouches, and sachets are still mostly unrecyclable on a large scale and often end up polluting the environment.
The EPA estimates that updating U.S. recycling infrastructure will cost between $36.5 and $43.4 billion, mainly for better packaging recovery, more composting capacity, and improved plastics processing. This investment has been slow to happen because there are no binding policy requirements.
The E.U. Regulatory Push and the U.S. Gap
Europe has moved decisively. The E.U.’s Packaging and Packaging Waste Regulation (PPWR) requires 70 percent of all packaging waste to be recycled by 2030, with plastics recycling rates targeted to double to 55 percent. Member states must cut packaging waste per capita by 15 percent by 2040 versus 2018 baselines. The European Commission is also requiring products claiming to be biobased, biodegradable, or compostable to meet minimum, verifiable standards to combat greenwashing.
In the U.S., California is leading the way with extended producer responsibility (EPR) laws and the new Voluntary Carbon Market Disclosures Act, both aimed at reducing greenwashing in sustainability claims. However, there is little action at the federal level.
At the November 2024 Busan negotiations for a UN Global Plastics Treaty, countries failed to reach a binding agreement. This has left a major policy gap and prevents a coordinated global effort.
What You Can Do
If you want to make a positive difference, it helps to be both a conscious shopper and an active citizen. Here are some steps you can take in your daily life:
Choose fiber and aluminum products. Corrugated boxes, paperboard, and aluminum cans have real end-of-use recycling systems. Recycling these materials truly closes the loop.
Don’t just trust the label. “Recyclable” does not always mean it can be recycled where you live. Check if your local program accepts the material, and use Earth911’s recycling search to see what is accepted in your area.
Focus on reducing packaging, not just recycling. Buying products with less packaging, choosing concentrates, or picking refillable options has a bigger environmental impact than recycling alone.
Support EPR policies. Extended producer responsibility moves recycling costs from cities and taxpayers to the companies that create packaging. This is a structural solution that market growth alone cannot achieve.
Ask companies for details. If you see vague claims like “eco-friendly” or “100-percent recyclable,” ask questions: Where is it recyclable? What infrastructure is used? What percentage of the material is actually recycled? Demand clear, verifiable answers.
If you value the environment, keep a variation on Smokey Bear’s familiar advice in mind: Only you can prevent the economy from burning down the planet. Your response needs to combine thoughtful choices when shopping with active communication with friends, family, the businesses you frequent, and the representatives you elect.
Editor’s Note: This article, originally authored by Gemma Alexander on April 14, 2020, was substantially updated in April 2026.
Turn back the clock to our first conversation with David Katz, founder of Plastic Bank. He shares his vision for a regenerative society built on grassroots recycling programs that help low-income regions build resilient communities. The Vancover, B.C., startup compensates more than 30,000 plastic recyclers in the Philippines, Indonesia, Brazil, and Egypt. To date, Plastic Bank has stopped over 99 million pounds of plastic waste — the equivalent of more than 2 billion plastic bottles — from ente
Turn back the clock to our first conversation with David Katz, founder of Plastic Bank. He shares his vision for a regenerative society built on grassroots recycling programs that help low-income regions build resilient communities. The Vancover, B.C., startup compensates more than 30,000 plastic recyclers in the Philippines, Indonesia, Brazil, and Egypt. To date, Plastic Bank has stopped over 99 million pounds of plastic waste — the equivalent of more than 2 billion plastic bottles — from entering the world’s oceans, and the pace of its collections is accelerating. The people who collect plastic are paid for the material they deposit at more than 511 Plastic Bank branches. Katz’s team has partnered with more than 200 companies, including Procter & Gamble, HelloFresh, L’Oreal, and Coca-Cola, to create circular economies in plastic packaging.
David Katz, founder and CEO of Plastic Bank, is our guest on Earth911’s Sustainability in Your Ear.
Their next goal is to capture 10 billion bottles, which still represents only 1.7% of the 583 billion produced in 2021, according to Euromonitor. David explains that a shift in mindset from extractive ownership to regenerative stewardship can break the economic mold and bring prosperity in regions where so much valuable material currently is treated as waste. Plastic Bank uses a blockchain-based data collection and reporting system that helps collectors track their earnings and which provides transparency and traceability for the plastic captured. Plastic Bank works with plastic recyclers to convert the collected bottles into SocialPlastic, a raw material for making new products. They sell plastic #1, #2, and #4 to industry to recover their costs. You can learn more about Plastic Bank at plasticbank.com.
Every kilogram of medical X-ray film holds 5 to 15 grams of silver — enough to make tossing those old films in the trash not just an environmental problem, but an outright waste of a recoverable precious metal. Add the fact that it’s also illegal to throw X-rays in the garbage in most jurisdictions, and the case for recycling them becomes urgent.
Millions of Americans still have film X-rays sitting in file folders, shoe boxes, or back-of-drawer oblivion. These relics from a pre-digital era of me
Every kilogram of medical X-ray film holds 5 to 15 grams of silver — enough to make tossing those old films in the trash not just an environmental problem, but an outright waste of a recoverable precious metal. Add the fact that it’s also illegal to throw X-rays in the garbage in most jurisdictions, and the case for recycling them becomes urgent.
Millions of Americans still have film X-rays sitting in file folders, shoe boxes, or back-of-drawer oblivion. These relics from a pre-digital era of medical imaging need to be handled safely. Whether you’re a patient trying to clear out a closet or a smaller clinic still managing physical archives, understanding how X-ray film recycling works, why it matters, and who accepts it can help you make a responsible choice that’s good for the environment and, in some cases, your wallet.
What’s Inside an X-Ray Film
X-ray films are made of polyethylene terephthalate (PET) plastic, the same material used in many beverage bottles, coated with an emulsion layer containing silver halide crystals. When the film is exposed to X-ray radiation, those silver halide crystals capture the image by converting to metallic silver to produce the dark-and-light diagnostic image your doctor reads.
That silver content is why X-ray film is worth recycling. A research paper in the Journal of Environmental Chemical Engineering reports that medical X-ray films typically contain between 5 and 15 grams of silver per kilogram of film. That’s the highest silver concentration of any common photographic material and a meaningful quantity: at 2025 silver spot prices hovering around $30 to $35 per troy ounce, a 50-pound box of old hospital films can yield real financial value through silver recovery.
The plastic substrate, once the silver has been stripped out, is recyclable PET. Nothing in a properly recycled X-ray film needs to go to a landfill.
Why You Can’t Just Throw X-Rays Away
Federal and state regulations prohibit tossing X-ray films in the ordinary waste stream for two separate reasons.
First, silver is classified as a hazardous material in landfill environments. When films degrade in landfills, silver leaches into soil and groundwater, where it can harm aquatic ecosystems and contaminate drinking water supplies. The EPA’s Resource Conservation and Recovery Act governs how silver-bearing waste must be handled. X-ray films older than 50 years may be made from nitrocellulose, a highly flammable material that requires special EPA-regulated transport and disposal handling.
Second, X-ray films are protected health information (PHI) under HIPAA and its successor, the HITECH Act. That means they cannot simply be thrown out, shredded in a standard office shredder, or otherwise disposed of without ensuring the images and any associated patient data are rendered permanently unreadable. The responsibility for proper disposal falls on whoever has the films, the originating medical facility, or, in some states, the patient themselves.
How X-Ray Film Is Recycled
The modern silver recovery process is efficient and well-established. According to Radiopaedia, the current standard method — called the “wash” process — recovers more than 99.9% of the silver in the film.
The process typically unfolds in four stages:
Collection and sorting. Films are collected, weighed, and assessed. Films received in paper patient jackets have those jackets separated first. The paper goes to standard recycling centers, and the film is handled separately.
Shredding and chemical wash. The film is shredded and immersed in a chemical bath of cyanide solution, though some facilities now use alternative reagents to dissolve the silver emulsion from the plastic base.
Electrolytic silver recovery. Silver is separated from the solution by electrolysis, producing refined silver that can be cast into bars or coins and returned to the industrial silver market.
PET plastic recycling. The now-clear plastic substrate is baled and sent to PET recyclers for reuse in manufacturing.
HIPAA-compliant recyclers also provide a Certificate of Destruction documenting that all protected health information on the films has been permanently and irrecoverably destroyed, which is essential for any medical facility’s compliance records.
Most New X-Rays Are Already Digital But Film Persists
The vast majority of U.S. hospitals and large imaging centers have completed the transition to digital radiography, which eliminates film entirely. Digital systems transmit images directly to secure electronic health records, reducing cost, storage burden, and chemical waste.
However, film-based imaging persists in several settings, such as some smaller clinics, rural practices, dental offices, veterinary practices, and industrial non-destructive testing (NDT) applications, which continue to use conventional film. If you’re receiving imaging at a smaller or independent practice, it’s worth asking directly: “Do you use digital imaging, or do you still produce physical film?” If the answer is film, follow up with: “What is your policy for recycling X-rays when they’re no longer needed for my care?”
A responsible provider should have a documented recycling process in place. Many do so because the silver recovery value incentivizes facilities to partner with certified recyclers rather than pay for disposal.
Recycling Programs: Who Accepts X-Ray Film
The X-ray recycling landscape is largely served by specialized national companies rather than municipal programs. Most curbside and drop-off programs do not accept X-ray film. Here are reputable options for both medical facilities and individuals.
Free nationwide pickup; pays by weight; HIPAA-compliant; Certificate of Destruction; serves hospitals, clinics, dental offices, vets. Individuals should contact for small-quantity options.
Free pickup nationwide (minimum weights vary by state; typically 50 lbs out of jackets). Pays by weight based on silver market. HIPAA-compliant; EPA-registered. Serves facilities; individuals may ship.
Based in Homewood, Alabama; accepts shipments nationwide; one-time purges or recurring service; issues Certificate of Destruction. Focuses on medical and industrial film.
NAID AAA-certified chemical film wash; offers “Metal on Account” option (sell silver at a future date); accepts medical, industrial, litho, and microfilm.
First NAID-certified silver refiner in the world. Pays “spot” silver price; nationwide pickup available for large quantities (truckload); ships accepted. Medical focus.
Serves all 50 states; accepts medical, dental, veterinary, and industrial film; free pickup for qualifying volumes; Certificate of Destruction provided.
If you’re a patient with a few old X-rays at home from a broken bone, a dental procedure, or years of routine imaging, the options are more limited than for medical facilities, but they exist.
Most of the major X-ray recycling companies set minimum weight thresholds for free pickup (often 30 to 50 pounds without paper jackets). A typical individual patient’s collection of personal X-rays won’t meet that threshold, so your options include:
Mail-in services. Many recyclers, including B.W. Recycling/XRayFilmsDisposal.com and X-Ray Films Recycling, accept small-quantity mail-in shipments. You’ll typically pay postage; the recycler may pay you a small amount or simply provide free recycling in return. Contact the provider first to confirm their current individual consumer process.
Check local hazardous waste events. Some municipal household hazardous waste (HHW) events accept medical imaging film. Check with your county or city’s waste management program. Call ahead to confirm, as not all HHW programs accept X-ray film, and policies vary.
Return to your provider. Some medical facilities will accept old films for recycling as a patient service. Ask your clinic, hospital, or specialist’s office directly.
Contact your original imaging center. Many imaging centers retain legal ownership of films they produce, and some will accept returned films for recycling at no cost to the patient. Policies vary, and a call is often worth the time.
Watch for a common source of confusion: HIPAA’s destruction requirements apply to covered entities, such as healthcare providers and insurers, and their business associates, but not typically to individual patients who receive copies of their own records. As a patient, you are not obligated to follow HIPAA disposal procedures for your own X-rays. That said, ensuring the secure destruction of your imaging records remains sound personal data hygiene.
What You Can Do
Don’t throw X-rays in the trash or recycling bin. They are not accepted in municipal recycling programs and may be illegal to landfill in your state.
Ask about digital imaging before your next appointment. Confirm whether your provider uses digital or film-based imaging, and ask about their film recycling policy if film is still in use.
Search for a recycler using Earth911. earth911.com/recycling-search can help locate the few local options for X-ray film in the United States.
If you’re a patient with personal X-rays, contact a national recycler directly. Most will advise on mail-in options for small quantities. Don’t let confusion leave films sitting in a drawer indefinitely.
If your facility still uses film, set up a certified recycling program. The silver recovery value offsets the cost of a certified pickup, and a HIPAA-compliant Certificate of Destruction protects your organization from liability.
Login
